STANDING SEAM

Standing Seam is a wide tray roofing system, roll-formed on site in single length trays if necessary. It is fixed to solid substrates such as plywood or timber sarking. It is the ideal cladding for roof, facade, soffit and fascia areas. Using traditional European techniques, it enhances the style of any structure.Trays are seamed together using a variety of seam and cap methods, depending on functional and aesthetic requirements.

Standing seam offers much more flexibility than any other metal cladding.Shapes can vary from a standard parallel tray to a conical tray with straight or curved sheets. It is possible (when using appropriate material) to produce complex designs such as turrets and curved roofs, to customize the appearance of any building.

APPLICATION

Areas of application could include:

  • Roof
  • Facade
  • Turrets
  • Domes
  • Soffits
  • Fascias

Standing seam is also ideal for creating features as:

  • Chimney cladding
  • Flashings
  • Interior feature walls
  • Pillar and column surrounds
  • Gable canopies
SEAM OPTIONS

Standing seam is available in variety of profiles. We offer four of the most popular, flexible in design, and cost effective for manufacture and installation.

OPTIONS

ANGLE SEAM

Suitable for wall cladding and roofs with a minimum pitch of 5º

Variable pan A from 200 to 730 mm

Seam height – 1 inch (25.4 mm) or 1 ½ inch (38.1 mm)

Can be manufactured in following materials only:

  • Copper
  • Zinc
  • Stainless Steel
  • Aluminum
  • VITOR+, ZENEX+ or LUX
DOUBLE STANDING SEAM

Suitable for wall cladding and roofs with a minimum pitch of 3º

Variable pan A from 230 to 730 mm

Seam height 25.4 mm (1 inch) or 1 ½ inch (38.1 mm)

Can be manufactured in following materials only:

  • Copper
  • Zinc
  • Stainless Steel
  • Aluminum – ONLY selected brands. Please consult with us
ROLL SEAM

Suitable for wall cladding and roofs with a minimum pitch of 5º

Variable pan A from 230 to 730 mm

Seam height 25.4 mm (1 inch) or 1 ½ inch (38.1 mm)

Can be manufactured in following materials only:

  • Copper
  • Zinc
  • Stainless Steel
  • Titanium
  • Aluminum
  • VITOR+, ZENEX+ or LUX
ROLL CAP

Can be manufactured in following materials only:

  • Copper
  • Zinc
  • Stainless Steel
  • Titanium
  • Aluminum
  • VITOR+, ZENEX+ or LUX

Minimum pitches are dependent on factors like tray lengths, local conditions like snow zones, wind and rainfall intensities. Please consult with us for recommendations.