LONG RUN ROOFING AND ARCHITECTURAL CLADDING TOOLS
MIDWEST
AVIATION SNIP SET
3 Aviation Tin Snips Kit Pack-includes offset models cut to left, right, and center. Allows users to make cuts from every angular position; it is an excellent solution for cutting rough angles and narrow spaces.
AVIATION SNIP LEFT & RIGHT
2 PIECE OFFSET Kit-Contains offset models cut from left and right. Preferred among experienced sheet metal merchants and contractors.
AVIATION SNIP LEFT
LEFT OFFSET CUT-Cuts left curves straight and close. Most convenient when used in the right hand.
AVIATION SNIP RIGHT
RIGHT OFFSET CUT-Cuts RIGHT curves straight and close.
AVIATION SNIP STRAIGHT
Straight Regular Cut-Cuts curves simple and wide to the left and right. Easy use in both hands.
UPRIGHT RIGHT AVIATION SNIP
RIGHT UPRIGHT CUTS — This aviation snip cuts smooth and close right curves for left hand use in narrow and overlapping spaces
malco
UPRIGHT LEFT AVIATION SNIP
Left Upright Cut, smooth curves to the right. Simple to use with left hand. Appropriate for use in tight spaces and at overhead.
HAND SEAMER 3 INCH (STRAIGHT JAW)
Function-3 inch hand seamer sheet metal bending gears helps to fold, join and deflate sheet metal and metal products without requiring powerful tools.
OFFSET HAND SEAMER
For more secure grip in difficult conditions and pressured situation. Fast one-hand function, with a quick open and close lock movement, often allowing a free hand to a smooth body of work.
HAND SEAMER 6” INCHES
Package length:18.0"
Package width:18.0"
Package height:21.0"
HAND SEAMER 5” INCHES
Soft touch
Anti - slip insert handle
One Handed Special Lock Operation
Textured adjustable handles
HAND SEAMER 9” INCHES
Attached gentle touch
Anti-slip grip
Special One-Handed Lock operation
Textured adjustable handles
SEAMER & TONGS, OFFSET
Good FOR HVACR, ROOFING AND THE METAL SHEET WORK.
SEAMER & TONGS, STRAIGHT
Good FOR HVACR, ROOFING AND THE METAL SHEET WORK.
MINI BREAK LEGS
Compatible Leg Kit for Mini Brake
The legs come with bases and rivets
Quick to install
MINI BRAKE
Makes lightweight materials as thin as a 4 "square
Suitable for sheet metal up to 4 feet in diameter
Adjustable Rib Insulation
SCRIBER, SHEET METAL
DRIP EDGE FOLDING TOOL 18” INCHES
High Flexibility
Two Post Handle Model
Rib-reinforced steel frame built
Lightweight resilience
EDGE ROLLER
Special roller model of 3 stations
Quickly adjusts
Adjusts to make angled curves
DRIP EDGE FOLDING TOOL 24” INCHES
Weather proof finish
Works on constructed panels or at a pre-bending panel
Requires up to 1-1/2 inch wide bends in roof panel around the drip edge
bessey
(Bessey) IDEAL STRAIGHT CUTTING SNIPS HRC 59 - Model Left
Carbon steel, HRC 59 (blue)
Length: 260mm
Weight: 495g
(Bessey)IDEAL STRAIGHT CUTTING SNIPS HRC 59 - Model Right
Carbon steel, HRC 59 (blue)
Length: 260 mm
Weight: 495 g
stubai
(STUBAI) TIN SNIPS PELICAN PATTERN - COATING PVC coated
Unique Tin Snip for Long and STRAIGHT CUTS
Painted Body Heavy blades with induction,
(STUBAI) PLASTIC HAMMER RECTANGULAR - White
Built from Polyethylene Resistant
Resistant to impacts Additional Head secured to the handle Flared non-disappearing ash handle has a very strong grip Sheet metal doesn't rust
(STUBAI) TIN SNIPS PELICAN PATTERN - COATING Lacquered
Unique Tin Snip for Long and STRAIGHT CUTS
Painted Body Heavy blades with induction,
(STUBAI) PLASTIC HAMMER RECTANGULAR - Colored
Built from Polyethylene Resistant
Resistant to impacts Additional Head secured to the handle Flared non-disappearing ash handle has a very strong grip Sheet metal doesn't rust
(STUBAI) SEAMING PLIERS 45° - BOX/60MM
Special seaming pliers
45° angle
Forged
Mouth and jaws quenched and tempered
Slightly rounded edges
Red plastic coated handle
(STUBAI) SEAMING PLIERS 45° - LAP/STUBAI/60 MM
Special seaming pliers
45° angle
Forged
Mouth and jaws quenched and tempered
Slightly rounded edges
Red plastic coated handle
(STUBAI) PIG EAR PLIERS - LAP
Special forged pliers
Box and Lap Joint available
Jaws and mouth quenched and tempered
Slightly rounded edges
Red plastic coated handle
For high seams
The pointed angles at the mouth are particularly advantageous for the seaming of corners
(STUBAI) PIG EAR PLIERS - BOX
Special forged pliers
Box and Lap Joint available
Jaws and mouth quenched and tempered
Slightly rounded edges
Red plastic coated handle
For high seams
The pointed angles at the mouth are particularly advantageous for the seaming of corners
(STUBAI) ROLL BAG - 8 PCS
Sturdy bag for all kind of tools
For 8 parts minimum
Weight: 520 g
freund
(FREUND) PLASTIC HAMMER
PVC Polydor
Angular
(FREUND) TINSMITH'S HAMMER PVC TAPERED
PVC Polydor
Angular
One side tapered
(FREUND) PICCOLO PLIERS 45° BENT -
45° angled
Lap joint
Pre-coated handles
Insertion depth: 28mm
Jaw width: 22mm
Weight: 190g
(FREUND) STANDING SEAM OPENER
Pre-coated handles
Lap joint
Jaw width: 30 mm
Length: 250 mm
Weight: 420 g
LONG LIFE RULER - COMPOSITE BLACK-WHITE 2 M
Extremely rigid! Rigidity ensured by longitudinal glass fibers
Absorbs bending forces
Minimizes risk of breakage, as hard as beech wood
LONG LIFE RULER - COMPOSITE BLACK-RED 2 M
Extremely rigid! Rigidity ensured by longitudinal glass fibers
Absorbs bending forces
Minimizes risk of breakage, as hard as beech wood
wuko
(WUKO) LOCK n' ROLLER 1040 - 1040 WITH CARRY CASE
Tool for closing the single-lock standing seam
Closes the profile in both directions
Clever system of eccentric lever with disc springs
Forming rollers of stainless steel
Rope-tying device included
(WUKO) DUO BENDER - MODEL 3200 MAX SHEET THICKNESS 0.8 mm
The WUKO Duo Bender was especially designed for quick and easy bending of long, straight sheet metal strips.
Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle.
FOR BENDING UP TO 90° FOR ALL COMMON MATERIALS
(WUKO) UNI BENDER - 2204
For bending and forming sheet metal fabrication.
Suitable for both straight and curved sheets.
Equipped with four roller stops enabling easier handling and better guidance especially on outside radii.
Includes a screw-on handle for easier working at maximum bending height.
(WUKO) DUO BENDER - MODEL 3350 MAX SHEET THICKNESS 0.8 mm
The WUKO Duo Bender was especially designed for quick and easy bending of long, straight sheet metal strips.
Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle.
FOR BENDING UP TO 90° FOR ALL COMMON MATERIALS